Supported Cards:
================

VID /DID /SVID/SDID	Interface			Print Name
==================================================================
1fc9/4020/1fc9/3015	CX4 				"TN9030 10GbE CX4 Ethernet Adapter"
1fc9/4022/1fc9/3015	SFP+ APM QT2025 		"TN9310 10GbE SFP+ Ethernet Adapter"
1fc9/4022/1186/4d00	SFP+ APM QT2025			"D-Link DXE-810S 10GbE SFP+ Ethernet Adapter"
1fc9/4022/1043/8709	SFP+ APM QT2025			"ASUS XG-C100F 10GbE SFP+ Ethernet Adapter"
1fc9/4022/1432/8103	SFP+ APM QT2025			"Edimax 10 Gigabit Ethernet SFP+ PCI Express Adapter"
1fc9/4025/1fc9/3015	NBASE-T Aquantia AQR105		"TN9510 10GBase-T/NBASE-T Ethernet Adapter"
1fc9/4025/1186/2900	10GBASE-T Aquantia AQ2104	"D-Link DXE-810T 10GBase-T Ethernet Adapter"
1fc9/4025/1432/8102	NBASE-T Aquantia AQR105		"Edimax 10 Gigabit Ethernet PCI Express Adapter"
1fc9/4026/1fc9/3015	SFP+ TI TLK10232		"TN9610 10GbE SFP+ Ethernet Adapter"

- Kernel versions supported: 2.6.32-4.12

Version 0.3.6.14.2 2017/07/18
=============================
- Fix missing PCP bits in VLAN tag

Version 0.3.6.14.1 2017/06/27
=============================
- Add CX4 card support (TN9030)
- Fix ethtool speed reporting for SFP+ cards
- Fix Hibernate support
- Support Flow Control for TN9710 cards
- Update PHY firmware to 0.2.8.0 for TN9710 cards
- Support Thunderbolt Surprise Remove
- Fix Compilation failed for kernel 4.11

Version 0.3.6.14 2017/03/08
===========================

Version 0.3.6.13 2016/09/07
===========================
- New adapter naming convention
- Driver debugging options
- Support RHEL6.8
- Support kernel 4.7
- Firmware update for AQR105 and MV88X3110

Version 0.3.6.12 2015/02/19
===========================
- Support TI TLK10232 phy 
- Remove old MDIO interface 
- Support Aquantia AQ2104 phy 
- Merge D-Link special APM firmware and IDs into Jumbo Driver 
- Fix RHEL7 Compilation error 
- Support Speed force (100,1000,2500,5000,10000) 
- Support ethtool -s 
- Support ethtool -p for kernel version < 3.0 & > 3.13 
- Known Issues: 
- - Ehtool Info does not show support for 2.5GBASE-T & 5GBASE-T, but it could be set for supported devices. 

Version 0.3.6.11 2014/4/10
===========================
- Makefile checks is /etc/pm exists 
- Fixed VLAN bug 
- Removed TN8020 PHY support 
- Added WARNING compilation flag. 
- Work around H/W UDP false checksum error 
- Support ethtool -p for kernel version < 3.0 

Version 0.3.6.11 2013/12/8
===========================
- SFP+ 1G modules support 
- Ethtool RX checksum report fix 

Version 0.3.6.10.1 2013/12/25
===========================
- bdx_skb_rx_add_frag() 
- Receive buffer allocation low memory warning 
- Makefile checks is /etc/pm exists 

Version 0.3.6.10 2013/11/4
===========================
- False H/W tcp checksum error work around 
- Kernel 3.11 support 
- Multiple cards support 
- Updated Ethtool support 

Version 0.3.6.9 2013/09/22
===========================
- Reduced memory foot print by MAC FW size 
- Fixed close crash bug 

Version 0.3.6.8 2013/08/12
===========================
- Initial tn40xx Jumbo Driver release
